Aug 22 2014

Searching For Information On Woodworking Means Reading This Article

Searching For Information On Woodworking Means Reading This Article

Woodworking is an awesome hobby that leaves you open to so many different options that it could never get old. If you find that you are in a rut when it comes to the skills that you have you should read the article below. It is full of ideas that can bring new elements into the work that you do.

Before you get started on any woodworking project, do some research on the type of wood you will be using. Different types of wood absorb paint and stain differently, some too much, and some not enough. If you aren’t certain about what kind of wood you will need, just ask for help.

In a pinch, you can use a hacksaw blade as a makeshift compass. Often you can’t find a compass when you need it in room, when you are away from your shop. You can quickly nail a hole in the middle of a hacksaw blade, then steady the pencil against the proper tooth to get the right length. Draw that circle.

If you have been doing woodworking for some time now you may want to think about using your skills to make your own furniture. If you already have all that you need you could even do this as a service to those that are less fortunate than you. It is a great way to share your passion with others.

If there is a joint in your work that does not fit together properly, this cannot be fixed with glue. While it may seem like the simple way to fix things, it will only work temporarily. The best thing to do would be to start over and be more careful the next time.

When you are tackling the sanding portion of your woodworking project be sure that you are using the best type of sandpaper. There are many different types available, and using the wrong type can lead to your project being ruined. If you are not sure you are using the right type you can find the correct information online with the click of a few buttons.

Only cut using sharp tools. Older and dull tools result in tear-outs and even chipping, which is frustrating and a waste of time. Sharp tools means you get clean cuts quickly. You’ll also spend a lot less time sanding things to get just the right look and fit that you need.

Learn from woodworking experts. In fact, you could even search out a mentor that you can shadow to learn best woodworking practices. Seeing these skills in motion are some of the best ways to pick up and really own different woodworking techniques. And you may even make a long term friend in the process.

When wiping excess stain off wood, wipe in the direction of the grain. Otherwise, the stain will just lay on top. Not only does this ensure that the stain is getting all the way into the grain, it will show off the grain of the wood to its best advantage.

When caulking using silicone caulk, mist the caulk with a small amount of rubbing alcohol. The alcohol acts as a lubricant allowing your to smoothly run your finger through the caulk for a perfect line of caulk every time. Spraying the surrounding area with alcohol also keeps the caulk from adhering to the surrounding surfaces.

You can make your own router base using quarter-inch acrylic, which is easy to purchase at a home improvement center. This type of homemade router base is stronger and more reliable than the type that comes with a router. You will get a better and more accurate straight edge due to the superior strength and stability of this material. Just use the base that came with your router as a pattern to create your own durable router base using an acrylic sheet.

Make sure there are no spots of glue on the wood before proceeding to finish your project. The spots will show up as lighter spots after the finish has been applied. You can use mineral spirits of naptha to completely remove all traces of glue from the wood. You may also be able to remove the glue by sanding the wood.

Some power tools are essential to have prior to starting any woodworking project. Table, circular and jigsaws, as well as a drill and power sander are all must haves. A power sander will work, but an orbital sander works the best.

Take a class on basic woodworking safety before embarking on your first woodworking project. You can check your local home improvement stores for woodworking safety classes. Your local community college also may offer beginning woodworking classes that include safety training. At the very least, read about proper safety techniques online.

Always protect your hearing when working in the shop. You can purchase a set of quality earplugs or earmuffs to help protect your sensitive ears from the common noises found in a woodworking shop. Many people think it is silly to use hearing protection; however, powered hand tools can cause serious damage to one’s hearing.

Now that you have read the article above you surely have realized that you have so much more available to work with than you thought before. The key to keeping your hobby interesting is to continue to learn about your options, just as you have by reading the above article. Now get out there are put the above tips to work.

Leave a Reply

XHTML: You can use these tags: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>